The Importance of Air Gaps in Providing Safe Food to All

Late last month, I was exploring job tasks that are important for entry-level foodservice managers to understand related to food safety.  The usual items that you would suspect were on the list were certainly included – foodborne outbreaks; temperature danger zone; physical, biological, and chemical contamination; personal hygiene and proper glove use; HACCP systems, etc. But one thing I noticed was missing that really is integral to protecting the food supply in any foodservice operation is air gaps.

I thought back to when I was starting my management career in foodservice, and I know I was certainly aware of what an air gap was, but looking back now, I certainly took them for granted.  After all, I was managing a foodservice operation that had been opened since the 1960s.  Certainly, all the plumbing had air gaps in place, and it wasn’t something that I had to worry about – or so I thought.

There have been instances where a lack of air gaps did cause illness – and most have been in established operations.  For example, a few years ago, a popular quick service Mexican restaurant in California caused over 100 customers to contract Norovirus.  Upon investigation, the health found that contaminated water from a sink that lacked proper air gaps had likely caused the outbreak.

Air gaps may be a dry subject to discuss and learn about, but they are a critical component of food safety…

If you are not quite familiar with what an air gap is, it is a vertical space between the water outlet and the flood level rim of a sink or other plumbing fixture. Essentially, a physical separation between potentially contaminated water and the source of fresh water. It is designed to prevent any backflow of contaminated water into the freshwater supply. This is especially important in areas where food is prepared, cooked, or served and plays an important role in preventing the spread of harmful bacteria, viruses, and other pathogens that can cause foodborne illness.

Why are air gaps so vital to protecting public health? When water pressure drops in a plumbing system, a vacuum can form, causing water to flow backward and potentially contaminate the freshwater supply. An air gap prevents this from happening by creating a physical barrier between the water source and the potentially contaminated water. Without an air gap, contaminated water can easily flow the water supply, ultimately contaminating food and causing illness.

It is important to note that air gaps must be properly installed.  But they must also be properly maintained to be effective. Regular inspections and maintenance are critical to ensuring that air gaps are functioning properly and protecting against cross-contamination. I was reminded of this last week as I was drawing water for a mop bucket in our foodservice lab at the university – and I caught myself filling the bucket with the hose in the mop water, failing to keep the air gap that is needed to protect the water supply. What is the solution?  Cutting the hose, making sure to keep it long enough to be able to effectively fill the mop bucket, but short enough that an employee (or in this case, me!) cannot stick the hose in the mop bucket.

Air gaps may be a dry subject to discuss and learn about, but they are a critical component of food safety in any foodservice operation. Following best practices for air gap installation and maintenance will help any foodservice operator protect their customers and ensure the safety of the food they serve. Risk Nothing. 

Meat Color and Doneness: Persistent Pinking

Late in June, my family and I were able to visit the Black Hills, an area of the country in which I have not had the opportunity to spend much time.  One evening, as we dined at a local restaurant, I observed a table across the dining room sending back a dinner.  While I couldn’t hear the entire conversation and I certainly wasn’t trying to eavesdrop, it was apparent that the customer was unhappy with the cooking of their hamburger and was sending it back because it was too pink in the middle.  That immediately brought to my mind the phenomenon known as persistent pinking.  A term I became familiar with because of work done by some colleagues here at Kansas State, which they present each summer to a group of foodservice operators who join us on-campus for an in-depth week-long look at all things food safety.

Quat Binding – Why this Can Have a Disastrous Impact on Your Sanitation Program.

In June, I had the opportunity to represent FoodHandler and speak on food safety behavior for customers of Martin Bros. Distributing in Waterloo, Iowa.  One of the questions that was asked caught me a little off guard. The question was about quat binding.  It caught me off guard not because it was a bad question, but only because it was not something I had previously been asked nor had not yet been exposed to the phenomenon. However, I soon learned that in certain jurisdictions, it is resulting in changes to how sanitizing cloths are to be stored in sanitizing buckets (or not) in the foodservice industry. When I returned home from the trip, I had to dig into it to learn about what quat binding is and how it might impact foodservice operations.

Are Grades for Foodservice Inspections a Good Idea?

I generally try to stay away from controversial topics in my blog, but this is one I thought it might be interesting to discuss. Occasionally on my travels, I will come across a state or a local jurisdiction that requires foodservice inspection scores be posted in the window of the establishment.  The idea is to allow would-be customers the ability to see how the foodservice operation in which they are about to eat scored on their latest health inspection.