The FDA Food Code Requirement for the Person in Charge
Every restaurant has someone running the show during any given shift. The FDA Food Code has a name for that person, the Person in Charge (PIC), and it has a very specific set of obligations attached to the role.
Sections 2-101 and 2-103 define who the PIC is, what they must know, and what they’re personally responsible for during every hour of operation. A few weeks ago, I had the opportunity to participate in a question review for a licensed food safety exam provider, and we had a rich discussion about the PIC requirement and its implications for operators. Each person on the call had somewhat similar thoughts about the provision, but they also differed a bit. Thus, I thought digging into this requirement might make an interesting blog post.
The PIC is the individual present at a food establishment who is responsible for the operation at the time of inspection. Two details matter here: the PIC must be physically present, and the role rotates with each operating period. If the general manager goes home and the closing manager is the most senior person in the building, that manager is the PIC, with all the obligations that come with it.
Does the person have to be a “manager”? In other words, could you appoint a lead cook or a shift lead to serve as the PIC? Absolutely! The food code does not attach a specific title to the person in charge. Any lead employee could serve as a PIC if they meet the knowledge requirements under the code.
The Food Code doesn’t just require someone to be in charge who simply assigns tasks and tells people when they can leave for the day. Rather, the PIC must demonstrate knowledge of foodborne illness prevention. That means they must either be a certified food protection manager or demonstrate knowledge by answering a health inspector’s questions during an inspection.
In practice, your PIC should be able to speak confidently about proper cooking, holding, and cooling temperatures; the employee health policy; allergen information for your menu; and the specific food safety controls in your operation.
…The most important food safety tool in any kitchen isn’t a thermometer, it’s a knowledgeable, present, engaged PIC…
- Employees are properly trained in food safety and allergen awareness before working independently.
- The employee health reporting system is functioning, meaning that staff know to report symptoms and diagnoses to the PIC, and the PIC knows what to do with those reports.
- New hires are screened for relevant health conditions before they start handling food.
- Handwashing practices are actively monitored, not just assumed.
- Foods are received from approved suppliers, are received at correct temperatures, and are protected from contamination.
- Ill employees are kept away from food, even if they haven’t self-reported.
- Cross-contamination is controlled through proper storage, equipment use, and product flow.
- Temperature requirements are met for cold holding, hot holding, cooking, cooling, and thawing.
- Sanitizing solutions are at proper concentration, are actively monitored, and are properly used.
When a health inspector arrives, they identify the PIC first. Every question, every finding, and every corrective action runs through that person. A PIC who can’t answer knowledge questions or locate documentation is demonstrating non-compliance in real time, and that’s a violation in itself.
The PIC requirement isn’t bureaucratic overhead. It’s built on a simple, evidence-based insight: when someone knowledgeable is consistently in charge of food safety, outbreaks are less likely to happen. During a busy service with dozens of meals going out every hour, there are hundreds of food safety decision points. The PIC is the person whose job it is to actively think about each of them. The most important food safety tool in any kitchen isn’t a thermometer; it’s a knowledgeable, present, engaged PIC.
These sections are among the most consequential in the entire code and treating them as a box to check won’t move the needle on food safety. The operators who truly embrace the PIC requirement, those who understand why it exists and make sure they have a real food safety champion on every shift, are the ones protecting their customers, not just skating by to appease regulators. Risk Nothing.
READ MORE POSTS
The Route to Safer Fresh Fruits and Vegetables
Although fruits and vegetables are one of the healthiest foods sources in our diet, we continue to have foodborne disease outbreaks of significance from produce, sometimes affecting large groups of people in multiple states because of their wide distribution. The CDC estimates that fresh produce now causes a huge number of foodborne illness outbreaks in the United States. Produce needs our continued food safety efforts at the restaurant level as well as at the stages in agricultural production. Occasionally, fresh fruits and vegetables can become contaminated with harmful bacteria or viruses, such as Salmonella, E. coli 0157:H7, Norovirus, and Hepatitis A. This contamination can occur at any point from the field to our table. If eaten, contaminated fruits and vegetables can cause foodborne illness.
Be Cool, Chill Out, Refrigerate Promptly!
The Cold Chain -- Keeping perishable foods at proper cold holding temperatures (between 28°F and 41°F maximum or 0°F for frozen food) from your food producers / manufacturers to your customers has to be one of our strongest links to safe food and high quality. Sometimes that is referred to in the food industry as “maintaining the COLD CHAIN”. Any slip ups in the cold chain, and we have a weak link. Most all of our state food regulations require 41°F as a cold maximum, but colder is a “best practice” policy to maintain.
Cutting Board Safety
Everyone knows to prepare food only on a clean and sanitized surface. Everyone also knows not to prepare food on a surface previously used to prepare any type of uncooked meat—cross-contamination. But does everyone know what this clean, sanitized, uncontaminated surface should be made out of? Or how cutting boards should be cared for?
A Date with Safe Food Labels
When it comes to food, calendar dates relating to time and temperature are important and sometimes confusing. Terms we use are: 1) food product or code dating used for commercial food manufacturing and 2) date marking used for food prepared onsite in a restaurant. In a restaurant at the receiving step or the retail food store as a consumer, "Sell by July 14" is a type of information you might find on a meat or poultry product. Are dates required on food products? Does it mean the product will be unsafe to use after that date? Here is some background information, which answers these and other questions about food product dating.
