Be Cool, Chill Out, Refrigerate Promptly!
The Cold Chain — Keeping perishable foods at proper cold holding temperatures (between 28°F and 41°F maximum or 0°F for frozen food) from your food producers / manufacturers to your customers has to be one of our strongest links to safe food and high quality. Sometimes that is referred to in the food industry as “maintaining the COLD CHAIN”. Any slip ups in the cold chain, and we have a weak link. Most all of our state food regulations require 41°F as a cold maximum, but colder is a “best practice” policy to maintain.
The Flow of the Food—In food service we refer to the stages that food travels through on its precarious route to our customers, as the flow of the food. Our “be cool” theme above must be in action. Those cold stages requiring refrigeration or control of the cold food temperature typically are:
1. Receiving cold perishable or frozen foods
2. Cold storage and thawing of potentially hazardous and perishable food
3. Maintaining the cold temp. during preparation
4. Cold holding after food preparation
5. Rapid cooling if a leftover cooked food (within 4-6 hours maximum)
6. Cold foods served to the customer
The Stem Thermometer or Thermocouple is the critical tool for checking our food temperatures, particularly upon receiving foods from your suppliers. If that weak link happens at supplier transportation level, reject the food shipment. The thermometer must be used throughout the work day and maintain daily temperature charts. As for your temperature readings, the colder, the better! Especially for fish, meats, and poultry. The colder your refrigeration equipment can keep chilled foods without freezing them, the longer the shelf life of the food. Storing cold food at an internal temperature of 35°F instead of 41°F might double the shelf life of some foods.
Cold Capacity –Refrigeration units, refrigerated prep tables, deli cases, and walk-in coolers all differ in their capacity to keep foods cool and recover after being open. That’s especially true in a hot kitchen. In all instances, the air inside the refrigerated compartment must be a few degrees colder than 41°F to assure that cold food internal temperatures are held at 41°F or below. For example, if you want your food to cold hold at 35°F, you refrigeration unit has to run an air temperature of 31°F to 32 °F. Storage sections near the cooler compartment door are always warmer.
Take Cold Storage Temperatures & Save Money —Dairy, fresh seafood, poultry, meat and deli type meat suppliers recommend 28-35°F internal temperature for optimum freshness and shelf life. FDA recommends 41°F for most fruits and vegetables (other than whole tomatoes that are ripening, bananas, raw potatoes, etc. that can be room temperature).
Pre-chilling Cut Fruits, Vegetables, & Salad Ingredients — Cut tomatoes and cut greens have been the cause of many outbreaks, so the FDA Food Code requires that once they are cut, they must be held cold at 41°F or below. It’s always a good idea to pre-chill any ingredients for salads before mixing them (examples: chicken or tuna salad, salsa ingredients, etc.).
Use that thermometer several times a day and record temperatures. Teach the food service crew what it really means to “be cool, chill out, and refrigerate promptly”.
[download id=”818″]
***
About the Author: Lacie Thrall
Lacie Thrall passed away in early 2017 after a long illness. She dedicated her 35-year career to improving the health and well-being of others by promoting food safety best practices. Lacie worked in environmental health for 17 years before joining FoodHandler in 1997 as the Director of Safety Management. While at FoodHandler, she trained employees and customers on safe food handling practices, including proper hand hygiene and glove use. Later as a FoodHandler consultant, Lacie provided the foodservice industry with food safety information and advice through her blog on FoodHandler.com.
Remembering the Importance of Food Safety During Food Safety Education Month
In the foodservice industry, every plate that leaves your kitchen carries not just flavors and aromas, but also the responsibility of providing safe and wholesome meals to customers. Celebrated each September, National Food Safety Education Month provides a platform for foodservice professionals to reaffirm their commitment to food safety. It's a reminder that excellence in foodservice operations must always be accompanied by excellence in food safety; a reminder that any great meal begins with safe food as the foundation.
Embracing Technology for Enhanced Food Safety in Foodservice Operations
Technology. We love it, we hate it. I’ve always been fascinated by technology; I remember getting my first Blackberry in the mid-90s and thinking it was the pinnacle of technological advances. Before that, I remember ordering a dictation program in college that was going to revolutionize the way I “typed” my assignments. Looking back, it really wasn’t worth the box that the program came in. Now, we have ChatGPT that will write the entire paper for us!
Meat Color and Doneness: Persistent Pinking
Late in June, my family and I were able to visit the Black Hills, an area of the country in which I have not had the opportunity to spend much time. One evening, as we dined at a local restaurant, I observed a table across the dining room sending back a dinner. While I couldn’t hear the entire conversation and I certainly wasn’t trying to eavesdrop, it was apparent that the customer was unhappy with the cooking of their hamburger and was sending it back because it was too pink in the middle. That immediately brought to my mind the phenomenon known as persistent pinking. A term I became familiar with because of work done by some colleagues here at Kansas State, which they present each summer to a group of foodservice operators who join us on-campus for an in-depth week-long look at all things food safety.
Quat Binding – Why this Can Have a Disastrous Impact on Your Sanitation Program.
In June, I had the opportunity to represent FoodHandler and speak on food safety behavior for customers of Martin Bros. Distributing in Waterloo, Iowa. One of the questions that was asked caught me a little off guard. The question was about quat binding. It caught me off guard not because it was a bad question, but only because it was not something I had previously been asked nor had not yet been exposed to the phenomenon. However, I soon learned that in certain jurisdictions, it is resulting in changes to how sanitizing cloths are to be stored in sanitizing buckets (or not) in the foodservice industry. When I returned home from the trip, I had to dig into it to learn about what quat binding is and how it might impact foodservice operations.
