Cutting Board Safety
Everyone knows to prepare food only on a clean and sanitized surface. Everyone also knows not to prepare food on a surface previously used to prepare any type of uncooked meat—cross-contamination. But does everyone know what this clean, sanitized, uncontaminated surface should be made out of? Or how cutting boards should be cared for?
What’s the BEST board? Over the last 25 years there have been microbial studies to determine which type of cutting board is safest. They found that microorganisms become lodged in some types of cutting boards easily especially with grease and proteins, despite washing the board. Bacteria can survive dormant until the next time the board is used. Another recent study showed that wooden cutting boards are actually safer – citing bacteria die within three minutes of exposure on a wooden board but can survive on a plastic board. This topic is still up for debate, but the consensus seems to agree that a sanitized cutting board is a safe cutting board. Correct cleaning, sanitizing, and care are imperative for longest life of your cutting boards.
For commercial kitchens there are several types of cutting boards to choose from:
• WOOD – Hard rock maple or cherry hardwoods are less porous and better in the wood category, but expensive and heavy. They require care with food grade mineral oil or grape seed oil to keep them in condition and some sanding eventually. Hardwood is best to keep knives from dulling and provide friction from slipping. If you prefer wood, consider using them for cutting vegetables, herbs, and bread. Bakeries also like hardwoods.
• BAMBOO— Newer to the kitchen, but are harder and even less porous than the hardwoods. Bamboo absorbs very little moisture and resists scarring from knives, so they are more resistant to bacteria than other woods. Bamboo also requires some mineral oil care. It’s actually a grass and not a wood, and do get worn or “furry” after lots of use, which makes them splinter eventually.
• GLASS— Not at all porous. Easy to clean and sanitize, but are worst for dulling knives, so not good for commercial use.
• PLASTIC – Most often recommended by professional chefs and are NSF certified. Plastics have improved and now use a high-density polyethylene called “Sanatec®” that claim it will not dull knives and is three times stronger than older plastic boards. Plastics can be color coded (usually 6-7 colors) and easily sized. There are new materials that are heat-resistant, will not warp, and can be used with serrated knives, so check out your cutting board plastic material types when purchasing.
• MARBLE & GRANITE—These are stone, so look beautiful and are great for serving foods. However, they also dull knives. The additional cons for marble and granite are staining from grease, oil, coffee, and wine. Bakeries like the stone boards as they keep dough cooler. Granite is stronger than marble, as far as chips and scratches.
The main concern with using cutting boards is avoiding cross-contamination. Boards used for cutting raw meat, poultry or seafood should be used exclusively for this type of preparation. Color-coded boards (NSF certified types) are a good solution. It is very important to cut all bread, produce and other ready-to-eat foods on boards that were not used for meat/poultry/seafood preparation – even if the board has been sanitized.
Don’t forget “cross-contact” with food allergens. When preparing food for a customer with a known food allergy, be careful to thoroughly wash and sanitize boards and knives before cutting foods for that person. Microscopic allergenic proteins can adhere to poorly cleaned equipment and hands.
Clean & Sanitize It! The best way to clean a wooden cutting board is to scrape off all food residues with a steel scraper or spatula. Then sprinkle the board with coarse salt and lemon juice, and use a clean cloth to scrub the surface. The salt and the lemon interact to form a mild acid, which cleans the wood. Rinse the surface with cold water after any stains have been removed. Then sanitize it. Cutting boards that are clean-in-place, should be cleaned and then sanitized after every use, with a solution of one to two teaspoons chlorine bleach per quart of water or a commercial approved sanitizer. In food service facilities, use the auto-dishwasher for movable plastic type boards or manual 3 compartment sink method: 1) wash in warm soapy water, 2)rinse with clear warm water, 3) immerse in sanitizing solution and air dry.
Most important in cutting board safety is knowing when to replace the board. Once deep grooves form in the board, it is time to discard the board. These grooves are a breeding ground for pathogenic microorganisms.
***
About the Author: Lacie Thrall
Lacie Thrall passed away in early 2017 after a long illness. She dedicated her 35-year career to improving the health and well-being of others by promoting food safety best practices. Lacie worked in environmental health for 17 years before joining FoodHandler in 1997 as the Director of Safety Management. While at FoodHandler, she trained employees and customers on safe food handling practices, including proper hand hygiene and glove use. Later as a FoodHandler consultant, Lacie provided the foodservice industry with food safety information and advice through her blog on FoodHandler.com.
Exclusion and Restrictions: Understanding Employee Health and the Food Code
I received a call earlier in the month from a foodservice operator who suspected that one of their employees may have fallen ill and wondered if they had to send the employee home for the day. Once I started to ask a few more questions, it became obvious that the operator wasn’t really in-tune with the food code requirements on restrictions or exclusions for employees who may not be feeling well. Given that most operations are dealing with staff shortages currently and the fact that we are about to head into the fall and winter – when we tend to see an increase in upper respiratory and other illnesses, such as the flu - it seemed like a very timely and important topic for the blog this month.
Cross Contamination and the Surfaces that go Unnoticed
In October, I ran across a new research study published in the Journal of Food Protection in early-September. The article explored cross contamination in consumer kitchens during meal preparation. One of the authors was a previous SafeBites presenter, Dr. Ellen Shumaker, at North Carolina State University. Although the setting was consumer kitchens and not the commercial kitchen many of you deal with daily, the findings were very applicable to what we often see in the foodservice setting.
Emergency Preparedness: The Not-so Calm After the Storm
If you and your foodservice operation have been hit by an emergency or other disaster, what comes next and how do you move forward? Much of the answer to this is predicated on the actual disaster that you are dealing with – a flood is certainly a much different than a fire, but some of the food safety considerations remain the same if your business has been left intact and has not been damaged by the disaster.
Emergency Preparedness and Responding to a Disaster with Food Safety in Mind
As I write the first blog this month, the realities of the devastation in Florida are coming to light as we also deal with the aftermath of Hurricane Fiona, which impacted Puerto Rico late in September. Recent news has been focused on the recovery efforts for all who have been impacted. Thus, I thought it would be fitting this month to discuss emergency disaster planning resources in our first blog and delve into recovering from a disaster in our second blog later this month.
