Calibrating More Than Just Thermometers

While classic bimetallic-stemmed thermometers have largely given way to modern digital alternatives, the act of calibrating them remains a fundamental food safety ritual drilled into foodservice professionals from their first week on the job. However, if your kitchen’s verification strategy stops at thermometers, you leave significant blind spots in your food safety defense system.

Calibration is the process of configuring an instrument to produce results within an acceptable range. In a modern commercial kitchen, we rely on dozens of automated systems, mechanical components, and electronic meters to keep food safe and ensure sanitation compliance. If these systems drift off-target, the consequences can be disastrous. To achieve true operational control, operators must expand their scope and examine three frequently overlooked compliance areas: dish machines, chemical dispensers, and automated data loggers.

Whether you operate a high-temperature sanitizing or a low-temperature machine that uses chemical sanitizers, the built-in gauges are your only immediate window into compliance. The FDA Food Code requires that high-temperature final rinse cycles reach at least 180°F (or 165°F for stationary racks) to ensure the dishware’s surface reaches the required 160°F sanitizing threshold.

However, external mechanical temperature gauges on dish machines can easily lose calibration due to constant vibrations, scale buildup, and regular wear and tear. If a gauge displays 180°F but the water is hitting 172°F, you are inadvertently washing dishes in the danger zone. Verification requires secondary testing. Operators must regularly use single-use dishwasher testing labels that have been run through a full cycle to verify that the performance of the machine matches its readout.

In low-temperature dish machines, three-compartment sinks, and automated chemical dispensing systems, chemical concentration is a matter of balance. Too little chemical results in a failure to sanitize, leaving harmful pathogens behind. Too much chemical can result in chemical contamination of food contact surfaces, presenting a direct hazard to guests.

Automated wall-mounted chemical dispensers rely on small, internal metering tips to pull the precise ratio of water and concentrated chemical. Over time, chemical crystallization, water pressure fluctuations, and mineral buildup can alter these ratios. Relying solely on the dispenser to do its job without regular verification is a gamble. Dispensers must be checked against manual chemical test strips, and the delivery pumps must be adjusted if the parts-per-million (PPM) deviate from manufacturer and regulatory guidelines.

…these tasks depend heavily on your specific operation, including the volume of food you are pushing out, the exact type of equipment you use, and your production system…

As the industry shifts toward digital food safety management, automated Bluetooth and Wi-Fi data-loggers have become the gold standard for monitoring walk-in coolers, freezers, and hot-holding cabinets. These sensors provide incredible peace of mind by constantly tracking ambient temperatures and sending alerts if a unit fails. But technology is not infallible. Automated loggers require regular comparisons to ensure their internal software offset is reading correctly.

To ensure these critical checks do not fall through the cracks, operators should implement a Master Calibration Schedule. Tracking these moving parts requires structured organization rather than memory.

In my experience, there are certain things you need to handle daily, others you can tackle each week, and some that only need attention once a month. Keep in mind, though, that these tasks depend heavily on your specific operation, including the volume of food you are pushing out, the exact type of equipment you use, and your production system. While I know your time is valuable, taking a few hours to critically review your operation will yield massive rewards for your kitchen down the road.

Once you have your system in place, document everything in a centralized master logbook or within your digital operating platform. Record the date, the instrument identifier, the initial reading, any corrective actions taken, and the initials of the verifying employee. When a health inspector sees an organized, comprehensive calibration history that extends far beyond standard handheld probes, it signals a top-tier culture of food safety excellence. Risk Nothing.

Person in Charge has Major Role Related to Employee Health

In the last blog, we talked about the importance of having healthy employees working in a foodservice operation and how that is related to foodborne illness. In this blog, we discuss employee health controls, one of five key public health interventions needed to control for risk factors of foodborne illness. The purpose of this control is to minimize the possibility that employees contaminate food. That means that employees need to be healthy, and that they report any symptoms or illnesses that might impact the safety of food served to customers.

Healthy Employees Keep Food Safe

Last month we talked about norovirus, the leading cause of foodborne illness outbreaks. Today we will turn our attention to overall employee health, and its role in keeping food safe. Many of you who are in my generation can relate to the fact that you rarely called in to work sick, and when you did you probably couldn’t get out of bed. You may also relate to being a manager and discouraging people from calling in sick because it was so difficult to be short-handed. Well, that mind set just has to change for the health of everyone!

Be Prepared—Norovirus Clean-Up Procedures

We are used to daily cleaning and sanitizing procedures, but norovirus clean-up is very different so it is important to be prepared. You should use these procedures if a norovirus outbreak occurs in your operation or if there is any vomiting event. You might be asking how do you know that norovirus was the cause of a vomiting incident. Well, at the time it occurs you won’t know. So the appropriate action is to assume that all vomiting may be caused by norovirus and clean it up as if it were. It is always better to err on the side of caution.